Gehl Z80 Compact Excavator Operator's Manual

This is the COMPLETE Operator’s Manual for the Gehl Z80 Compact Excavator.

This Manual Describes Procedures for Operation, Handling, Lubrication, Maintenance, Checking, and Adjustment. It Will Help The Operator or anyone Realize Peak Performance Through Effective, Economical and Safe Machine Operation and Maintenance.

Operator’s Manual Contains:
=========
1. Introduction
2. Safety Information
3. Product Overview
3-1. Intended uses
3-2. Break in period
3-3. Conditions to be met to assure compliance with EPA emission standards Conditions de conformité avec les standards d’émission EPA
4. Operation License
5. Ordering Replacement Parts and Service Calls
5-1. Location of machine serial number plate
5-2. Location of engine serial number plate
5-3. Location of EPA emission control plates Localisation de la plaque signalétique EPA
5-4. Ordering replacement parts and service calls
6. Contents
SAFETY
7. Basic Precautions
8. Operating Precautions
8-1. Precautions before starting the engine
8-2. Precautions for starting the engine, working and parking
8-3. Precautions for transportation
8-4. Precautions for the battery
8-5. Precautions for towing
9. Precautions for Servicing
9-1. Precautions before servicing
9-2. Precautions during servicing
10. Safety Messages (Warning Labels)
10-1. Location of warning labels
OPERATION
11. Identification of Important Parts
11-1. Overview of the machine
11-2. Controls and switches
12. Description of Control Devices
12-1. Monitors
12-2. Switches
12-3. Control levers and pedals
12-5. Storage compartment for the operation & maintenance manual
12-4. Engine hood
12-7. Bonnet B
12-6. Tool storage space
12-8. Bonnet R
12-9. Windshield
12-10. Hammer for emergency escape from operator’s cab
12-11. Operator’s seat
12-12. Headlight
12-13. Ash tray
12-15. Cabin side door
12-14. Right window glass
12-16. Air Conditioner
12-18. Fuse
12-17. Replenishment of windshield washer fluid
12-19. External power socket
13. Operating Instructions
13-1. Checking before starting the engine
13-2. Starting up the engine.
13-3. Operating and checking instructions after starting the engine
13-4. Traveling
13-5. Steering
13-6. Stopping the machine
13-7. Swinging the upperstructure
13-8. Operating the implement
13-9. Precautions for operating the implement
13-10. Precautions for working
13-11. Precautions for going up and down a slope
13-12. Escaping from the mud
13-13. Operations using the bucket
13-14. Handling quick coupler
13-15. Parking the machine
13-16. Inspection requirements after completing operation
13-17. Stopping the engine
13-19. Locking.
13-18. Inspection requirements after stopping the engine
13-20. Handling the rubber crawlers
13-21. Handling hydraulic P.T.O.
13-22. Releasing the internal pressure of the hydraulic circuit by accumulator
13-23. Replacing the bucket without the quick coupler
13-24. Reversing the bucket without the quick coupler
14. Transportation
14-1. Loading and unloading the machine
14-2. Precautions for loading the machine
14-3. Precautions for transporting the machine
14-4. Suspending the machine
15. Care and Service in Cold Weather
15-1. Preparing for cold weather
15-3. After cold weather ends
15-2. Precautions after a day’s work
16. Long-term Storage
16-1. Before storing
16-3. Using the machine again
16-2. Storing
17. Troubleshooting
17-1. Phenomena that do not constitute faults
17-2. Towing
17-3. If the battery is overdischarged..
17-4. Troubleshooting
MAINTENANCE
18. Precautions for Servicing
19. Basic Servicing Practices
19-1. Oils, fuel, and cooling water
19-2. Electrical equipment
19-3. Hydraulic system
20. Consumables
21. Fueling, Oiling and Greasing Based on Temperature Range
21-1. Fuel and oil
21-2. Cooling water
22. Standard Tightening Torque for Bolts and Nuts
22-1. Required tools
22-2. Torque table
23. Replacing Essential Parts Periodically
24. Maintenance Table
24-1. Table of service time intervals
24-2. Service intervals when using the hydraulic breaker
25. Procedures for Maintenance
25-1. First services
25-2. Nonperiodic services
25-3. Checking before start-up
25-4. Maintenance every 50 service hours
25-5. Maintenance every 100 service hours
25-6. Maintenance every 250 service hours
25-7. Maintenance every 500 service hours
25-8. Maintenance every 1000 service hours
25-9. Maintenance every 2000 service hours
SPECIFICATIONS AND DIMENSIONAL DIAGRAMS
26. Specifications and Dimensional Diagrams
OPTIONAL PARTS AND ATTACHMENTS
27. General Precautions
27-1. Safety precautions
27-2. Precautions for mounting an attachment (implement)
28. Optional Parts and Attachments
28-1. Optional parts and attachments
NOTES
29. Maintenance Log
30. Notes

=========

** Model Specification: Gehl Z80 Compact Excavator
** Language: English
** Total Pages: 244
** File Format: PDF
** Requirements: Adobe PDF Reader
** Compatible: All Versions of Windows & Mac, Linux OS, Iphone, Ipad, Android etc…

=========

This QUALITY manual is 100 percents COMPLETE and INTACT,
no MISSING/CORRUPT pages/sections to freak you out! It also is Bookmarked and SEARCHABLE to make what you need easy to find. Complete download comes in PDF format which can work under all PC based Windows operating system and Mac also. It saves to your hard-drive and can be burned to CD-ROM. It can be viewed on any computer, as well as zoomed and printed.

This manual is INSTANT DOWNLOAD. It means no shipping cost or waiting for a CD / paper manual to Arrive in the Mail. You Will receive this Manual today via Instant Download on Completion of Payment via our secure Payment Processor. We Accept All Major Credit/Debit Cards and Paypal. Buy From us and I Guarantee You’ll be a Satisfied Customer and Contact us if You have any Questions.

After your payment is submitted, The Download Link will appear at the checkout page and it will also be sent to your E-Mail Address.

Thanks for Visiting!