Lansing Linde S30, S30W, S40, S40W, S50, S50W, S60, S60W Diesel Forklift Trucks

This is the COMPLETE Operating Instructions Manual for the Lansing Linde Diesel Forklift Trucks Type 316; Models S30, S30W, S40, S40W, S50, S50W, S60, S60W.

This Manual Describes Procedures for Operation, Handling, Lubrication, Maintenance, Checking, and Adjustment. it will help the operator or anyone Realize Peak Performance Through Effective, Economical and Safe Machine Operation and Maintenance.

Covered Models:
S30
S30W
S40
S40W
S50
S50W
S60
S60W

Operating Instructions Manual Contains:
=========
DESCRIPTION
Technical data
Technical description
General view of truck
Controls and Indicators
Gauges and warning lights
BEGINNING OPERATION
Safety rules
Opening the side panels
Opening the bonnet
Opening the door (front opening)
Retaining the door (front opening)
Applying the seat belt
Opening the seat belt
Opening the door (side opening)
Retaining the door (side opening)
Applying the seat belt
Opening the seat belt
Daily checks and servicing before operation
Check engine oil level
Check fuel level
Check engine coolant level
Check brake fluid level
Working and steering hydraulic systems
Check oil level
Top up oil
Travel hydraulic system
Check oil level
Check tyre condition and pressure
Drive and steer axle tyre specification
Adjusting the drivers seat
Normal start
Starting the engine
Cold start
Stopping the engine
Engine malfunctions
OPERATION
Travel
Travel
Forward travel
Reverse travel
Changing direction of travel
Stopping the truck
Steering and braking
Steering
Service brake
Parking brake
Horn, fuses, lighting
Operating the horn
Fuses
Turning on the lights
Indicators, hazard warning, working lights
Turning on the indicator lights
Turning on the hazard warning lights
Turning on working lights
Windscreen wipers, washer, ventilation
Turning on the windscreen wipers
Turning on the windscreen washer
Turning on the ventilation
Operating the lifting device and attachments
Control levers
Lifting the lifting device
Lowering the lifting device
Tilting the deck up
Tilting the deck down
Traverse the lifting device – inwards
Traverse the lifting device – outwards
Operating optional attachments
Operating the sideshift
Before lifting a load
Load capacity plate
Lifting and travelling with load
Adjusting the fork spread
Lifting a load
Travelling with loads
Depositing the load
Before leaving the truck
Trailer coupling, wheel change
Trailer coupling
Locations for jacks when changing wheels
Hoisting the truck
Hoisting the truck
Towing instructions
Towing away
Towing procedure
After towing
MAINTENANCE
General information
Before attempting any service work ensure:
Work on the lifting device
Securing the lifting device
Securing the raised lifting device
Securing the lifting device against retracting
Securing the deck against tilting
Standard lifting device operation
Checks and maintenance work after the first 50 hours
Inspection and maintenance chart
Inspection and maintenance as required
Cleaning the truck
Cleaning and spraying the lift chains
Cleaning the air filter
Check the dust valve
Tightening wheel nuts
Check and clean the radiator and hydraulic oil cooler
Bleeding the fuel system
Bleeding the fuel lines
Check brake fluid level
Check windscreen washer bottle level
250-hour Inspection and maintenance
Battery check and electrolyte level
Check hydraulic and electrical systems
Steer axle lubrication
250-hour Inspection and maintenance cont..
Traverse cylinder rod end lubrication
Check V-belt tension and condition
Change engine oil
Drain engine oil
Renew engine oil filter
Top up engine oil
Cleaning the fuel sediment bowl
Lubricate the parking brake
500-hour Inspection and maintenance
Check condition and mounting of lifting device
and lift chain
Adjusting traversecylinder setting
Check forks and fork locking device
Check and clean the brake system
Check brake linings
Steer axle bearing check and adjustment
Fuel filter change
Fuel pump
Travel hydraulic filter change
Drive axle differential oil level
Check engine coolant strength
Working hydraulic suction filter change
Working hydraulic return filter change
Drive axle hub oil level check
1000-hour Inspection and maintenance
Check cooling system for leaks and tightness
Check air intake system for leaks and tightness
Check exhaust system for leaks and tightness
Air filter element change
Check traverse and lifting device roller bearings
Check drive and steer axle mountings
Check engine mountings
2000-hour Inspection and maintenance
Check travel hydraulic pump mountings
Check travel hydraulic motor mountings
Check injection nozzles
Valve tip clearances
Drive axle oil change
Working hydraulic oil change
Inspection and maintenance data
Fuel and oil recommendations
Electric circuit diagram
Hydraulic circuit diagram
Alphabetical index

=========

** Model Specification: Lansing Linde S30, S30W, S40, S40W, S50, S50W, S60, S60W Diesel Forklift Trucks 316 Series
** Language: English
** Total Pages: 75
** File Format: PDF
** Requirements: Adobe PDF Reader
** Compatible: All Versions of Windows & Mac, Linux OS, Iphone, Ipad, Android etc…

=========

This QUALITY manual is 100 percents COMPLETE and INTACT,
no MISSING/CORRUPT pages/sections to freak you out! It also is Bookmarked and SEARCHABLE to make what you need easy to find. Complete download comes in PDF format which can work under all PC based Windows operating system and Mac also. It saves to your hard-drive and can be burned to CD-ROM. It can be viewed on any computer, as well as zoomed and printed.

This manual is INSTANT DOWNLOAD. It means no shipping cost or waiting for a CD / paper manual to Arrive in the Mail. You Will receive this Manual today via Instant Download on Completion of Payment via our secure Payment Processor. We Accept All Major Credit/Debit Cards and Paypal. Buy From us and I Guarantee You’ll be a Satisfied Customer and Contact us if You have any Questions.

After your payment is submitted, The Download Link will appear at the checkout page and it will also be sent to your E-Mail Address.

Thanks for Visiting!