This is the COMPLETE Operating Instructions Manual for the Linde Diesel Truck 350-04 Series; Models H12D-04, H16D-04, H18D-04, H20D-04.
This Manual Describes Procedures for Operation, Handling, Lubrication, Maintenance, Checking, and Adjustment. it will help the operator or anyone Realize Peak Performance Through Effective, Economical and Safe Machine Operation and Maintenance.
Covered models:
H12D-04
H16D-04
H18D-04
H20D-04
Operating Instructions Manual Contains:
=========
1. Introduction
Introduction
Intended use
Impermissible use
Description of use
Symbols used
Technical description
2. Safety
Safety guidelines
Residual risks
Stability
In the case of tip-over
Handling consumables
Competent person
Regulations
Diesel engine exhaust emissions
Checking noise level
Fit attachments
3. Overview
Identification plates
General view
Warning label
Controller and panel
Instrument cluster
4. Operation
Instructions for running-in
Pre-shift checks
Daily checks
Engine cover use
Mounting/dismounting
Seat belt status and performance checks
Checking condition and performance
Adjustment of the driver’s seat*
Adjustment of the driver’s seat*
Seat belt *
Seat belt*
Horn operation
Adjusting the steering column
Starting the engine
Starting the engine
Engine shutdown
Driving
Driving
Forward
Reversing
Changing the drive direction
Parking
Steering system
Steering
Brake system
Service braking
Parking brake
Lifting devices and attachments
Lifting device controlled with a central joystick
Lifting device controlled with an independent joystick
Operating attachments
Additional equipment
Turning on the direction indicators
Transport
Load centre distance and load capacity
Load rating plate
Adjusting the fork spacing
Picking up a load
Loading
Driving with a load
Unloading
Tow coupling
Towing regulations
Before exiting the truck
Truck transport
Use a truck or flatbed trailer to carry the forklift truck
Lifting the truck with a crane
Truck storage
Measures to be taken prior to truck storage
Resuming use of the forklift truck
Disposal of old trucks
5. Maintenance
Summary
General information
Pre-service preparatory work
Fuel and oil datasheet
Recommended fuels and oils
Diesel fuel
Engine oil
Hydraulic oil
Lubricating grease
Coolant
Other lubricants
Periodic checks and maintenance
50 hr. service plan
500 hr. service plan
1000 hr. service plan
3000 hr. service plan
Preparations
Cleaning the truck
Calibrate the acceleration potentiometer and joysticks
Engine
Check the engine oil level
Change engine oil and oil filter
Fuel
Drain all water from oil filter
Change the suction filter
Drain all water from fuel system primary water trap*
Replace the fuel system primary water trap*
Cleaning the air filter
Change air filter insert, check the vacuum switch
Check the dust valve
Clean the prefilter*
Check the working condition of the V-belt
Changing the V-belt
Checking the working condition of the toothed belt
Replacing the toothed belt and tensioning pulley
Change the water pump
Check the leak resistance of the intake and exhaust systems
Check installation of hydraulic oil tank and fuel tank
Check the condition and secure positioning of the engine and engine retainer plate
Cooling system
Cleaning the radiator and hydraulic oil cooling device and checking the seals
Check the coolant level in the surge tank
Change the coolant
Steering axle and wheels
Clean and lubricate the steering axle
Check tyres for damage and foreign bodies
Check tyre inflation pressure
Tighten the wheel nuts
Chassis frame .
Check the lap seat belt for condition and correct operation
Check that the counterweight, overhead guard, steering axle and drive axle are secure
Check and lubricate other bearings and hinge points
Control system
Check and lubricate the pedals, traction controller and engine control linkage
Check the operation
Electrics
Check the battery status
Check the condition and tightness of cables, plugs and pipe connections
Check fuses
Hydraulics
Checking the hydraulic oil level
Change hydraulic oil
Replacing the pressure filter
Replacing the suction filter
Replacing the air filter
Checking the preload of the double hoses (if equipped with attachments)
Checking the leak resistance of the hydraulics, pump body, valve body and line
Load lifting system .
Cleaning and lubricating the sideshift forks* and checking connections
Checking the fork arms and the fork arm quick release apparatus
Checking the operation and installation of the lift mast, lifting chain and limit block
Lubricate the lift mast and chains with chain spray
Lubricating the lift mast and tilt cylinder bearings
Adjusting the length of the lift chains, and lubricating using chain spray
Re-tighten the lift mast clamping bolt
6. Technical datasheet
Lifting load diagram
Parameter overview
Technical datasheet H18D
Technical datasheet H20D
Lift mast parameter table
=========
** Model Specification: Linde H12D-04, H16D-04, H18D-04, H20D-04 Diesel Forklift Truck 350-04 Series
** Language: English
** Total Pages: 148
** File Format: PDF
** Requirements: Adobe PDF Reader
** Compatible: All Versions of Windows & Mac, Linux OS, Iphone, Ipad, Android etc…
=========
This QUALITY manual is 100 percents COMPLETE and INTACT,
no MISSING/CORRUPT pages/sections to freak you out! It also is Bookmarked and SEARCHABLE to make what you need easy to find. Complete download comes in PDF format which can work under all PC based Windows operating system and Mac also. It saves to your hard-drive and can be burned to CD-ROM. It can be viewed on any computer, as well as zoomed and printed.
This manual is INSTANT DOWNLOAD. It means no shipping cost or waiting for a CD / paper manual to Arrive in the Mail. You Will receive this Manual today via Instant Download on Completion of Payment via our secure Payment Processor. We Accept All Major Credit/Debit Cards and Paypal. Buy From us and I Guarantee You’ll be a Satisfied Customer and Contact us if You have any Questions.
After your payment is submitted, The Download Link will appear at the checkout page and it will also be sent to your E-Mail Address.
Thanks for Visiting!