This is the COMPLETE Operating Instructions Manual for the Linde Electric Reach Truck 115-02 Explosion Protected Series; Models R14-02, R16-02, R20-02.
This Manual Describes Procedures for Operation, Handling, Lubrication, Maintenance, Checking, and Adjustment. it will help the operator or anyone Realize Peak Performance Through Effective, Economical and Safe Machine Operation and Maintenance.
Covered models:
R14-02 Ex
R16-02 Ex
R20-02 Ex
Operating Instructions Manual Contains:
=========
Foreword
Approved applications
Technical note
Truck takeover
EC declaration of conformity
Description
Type plates
Technical data
Technical description
Introduction
Operator’s compartment and controls
Chassis
Drive and transmission
Electrical system
Steering
Mast, hydraulics and reach frame
Braking
General view of truck
Operating controls and indicators – dual-pedal model
Operating controls and indicators – single-pedal model
Operator`s display
Multi-purpose display
Hour meter for truck
Battery discharge indicator
Drive wheel position indicator
Overheating warning lights
Condition display
Brake fluid level warning light
Service warning light
Parking brake warning light
Battery unlocked warning light
Slow speed indicator
Indicator lights
Overheating warning light
Insulation monitor indicator light
Beginning operation
Safety rules
Experts
Safety information
Handling fluids and lubricants
Residual risks
In the event of tip over
Stability
Safety inspection
Explosion protection check
Operation of industrial trucks in the plant area
Noise emission data
Frequency characteristic for human body vibrations
Running-in instructions
Daily checks and services before operation
Checks and services prior to initial operation of the truck
Daily checks
Tighten the wheel fasteners
Check the condition for leakage resistance
of the traction wheel
Open the motor compartment cover
Removing the floor plate
Opening the top cover
Checking state of battery charge
Charging the battery
Reaching the battery out
Connect the battery to a suitable external battery charger
Check the battery condition, electrolyte level and specific gravity
Changing the battery (hoist method)
Changing the battery (roll on, roll off)
Steering column adjustment
Seat adjustments
Controls and their operation
Check the forks and fork quick-releases
Operation
Driving
Mounting and dismounting the truck
Starting on an incline
Dual-pedal model
Driving
Travel with the forks trailing
Travel with the forksleading
Change the direction of travel
Single-pedal model
Braking (dual-pedal model)
Regenerative traction brake
Hydraulic footbrake
Parking brake
Engaging the parking brake
Releasing the parking brake
Braking (single-pedal model)
Steering system
Steering
Turning radius
Central control lever (joystick) operation of mast and attachments
Raising the fork carriage
Lowering the fork carriage
Reaching the mast out
Reaching the mast back
Tilting the fork carriage forward
Tilting the fork carriage back
Operating the attachments
Operating the sideshift
Single control lever operation of mast and attachments
Operation of horn
Emergency isolator button
Before loading
Positioning the forks
Loading
Transporting a load
Unloading
Before leaving the truck
Fuses
Fuses (ancillary circuits)
Fuses (main circuit)
Slinging the truck
Wheel change
Jack locations when changing wheels
Emergency lower, steering and parking brake release
Emergency lower
Emergency steering and parking brake release
Towing instructions
Transporting the truck on a lorry or low-bed trailer
Hoisting the truck with a crane
Side guidance
Side guidance for drive-in racking
360° steering
Maintenance
Maintenance and safety guidelines
General information
Handling lubricants
Safety guidelines
Taking the truck out of operation
Measures before taking the truck out of operation
Putting the truck back into operation
General information
Mast unit and reach frame
Work on the mast and the reach frame part of the truck
Mast removal
Securing the reach frame against reaching in or out
The mast
Securing the mast
Inspection and maintenance after the first 50 hours of operation
Inspection and maintenance chart
Inspection and maintenance as required
Clean the lift truck
Lubricate the lift chains and mast channels
Adjust the lift chains
Check the condition of the wheels and tyres
Check the insulation and leakage resistance
Renew/replace the hydraulic hoses
Check drive wheel nuts
1000-hour inspection and maintenance
Check and adjust the parking brake
Check the hydraulic hoses and pipes for damage
Check the mast and lift chains for condition and security
Lubricate the mast, mast rollers, lift chains and chain pulleys
Lubricate the reach channels and rollers
Lubricate the battery trolley slides and associated mechanism
Check the condition and security of motor and battery connectors and cables
Check the hydraulic oil level
Lubricate the fork carriage and sideshift slider pad
Check condition of side guide rollers
2000-hour inspection and maintenance
Check the brake fluid level
Check the traction motor brake band and load wheel shoes for wear and adjustment
Renew the hydraulic tank breather filter
5000-hour inspection and maintenance
Check condition of brake pipes
Grease the load wheel bearings
Change the hydraulic oil and breather filter
Renew the hydraulic return linefilter
10000-hour or 5-year inspection and maintenance
Change the brake fluid
Inspection and maintenance data
Recommended lubricants
Hydraulic oil
Multipurpose grease
Gear oil
Steering drive gears
General purpose oil
Chain Spray
Brake fluid
Troubleshooting guide (hydraulic system)
Hydraulic system piping
Electric circuit diagram
Index
=========
** Model Specification: Linde R14-02, R16-02, R20-02 Explosion Protected Electric Reach Truck 115-02 Series
** Language: English
** Total Pages: 93
** File Format: PDF
** Requirements: Adobe PDF Reader
** Compatible: All Versions of Windows & Mac, Linux OS, Iphone, Ipad, Android etc…
=========
This QUALITY manual is 100 percents COMPLETE and INTACT,
no MISSING/CORRUPT pages/sections to freak you out! It also is Bookmarked and SEARCHABLE to make what you need easy to find. Complete download comes in PDF format which can work under all PC based Windows operating system and Mac also. It saves to your hard-drive and can be burned to CD-ROM. It can be viewed on any computer, as well as zoomed and printed.
This manual is INSTANT DOWNLOAD. It means no shipping cost or waiting for a CD / paper manual to Arrive in the Mail. You Will receive this Manual today via Instant Download on Completion of Payment via our secure Payment Processor. We Accept All Major Credit/Debit Cards and Paypal. Buy From us and I Guarantee You’ll be a Satisfied Customer and Contact us if You have any Questions.
After your payment is submitted, The Download Link will appear at the checkout page and it will also be sent to your E-Mail Address.
Thanks for Visiting!